Skip to content

Honda Civic (FN2) Turbo Conversion Package

£7,500.00

HONDA FN2 TURBO CONVERISON

 

Introducing a turbo package built using all genuine parts to make up to 700HP on a K Series Engine (With supporting engine work)

We’ve notoriously used this same setup/package on multiple Stock K20/K24 setups with great success and results.

 

Subtotal:

Add-ons total:

Total:

Introducing a turbo package built using all genuine parts to make up to 700HP on a K Series Engine (With supporting engine work)

We’ve notoriously used this same setup/package on multiple Stock K20/K24 setups with great success and results.

 

This Package contains the following parts:

  • Stainless Steel Tubular Manifold with an Hand Ported Collector
  • Turbo Options: Garrett or Pulsar (Different Options Available)
  • 45mm Wastegate
  • 50mm Blow Off Valve
  • 1000cc Injectors
  • Turbo water coolant Lines
  • Turbo oil feed & return Lines
  • Oil return fitting Welded into sump – (sump removal and welding necessary)
  • 3″ Stainless Downpipe
  • Atmospheric/Screamer or Recircuiting Pipe
  • Custom Front mounted Intercooler + Brackets
  • Aluminum Boost pipes, Boost Clamps + integrated IAT sensor boss and BOV fitting
  • 3.5″/4″Aluminum Intake pipe
  • Air Filter
  • Rocker cover breather filter
  • High speed Link IAT sensor
  • Vacuum line and fittings for wastegate and BOV
  • Heat Management where required (Firewall blanket, Wrapped Manifold/Downpipe/Screamer etc.)
  • Battery relocation (If Needed)
  • Performance NGK Spark plugs
  • 4 bar map sensor
  • Walbro In Tank uprated fuel pump
  • MAC 3 Port Boost Solenoid
  • Full Installation Of All Items At Our Workshop
  • Fittings
  • Gaskets
  • 10w-60 Engine Oil & Filter Change

 

Turbo Capabilities: (When supported with a engine modifications)

  • Pulsar GTX3076R: 500-600bhp
  • Pulsar GTX3576R: 600-700bhp
  • Garrett G30-660: 660bhp
  • Garrett G30-770: 770bhp

Other Turbos can be Sourced to suit requirements.

 

Requirements Needed:

Uprated clutch to support Power/Torque increase

76MM (3″) Cat-Back Exhaust System

ECUTEK Ecu Licence & Mapping

All these items are available from us at additional cost!

 

Alternative Heat Management Available:

  • Ceramic Coating Available for Manifold & Downpipe
  • Thermomet Coating (Highly Recommended for upto 80% Heat reduction)

All these items are available from us at additional cost!

 

Powder Coated Boost pipes and Intake Pipe (Customer can choose from the range of colours)

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.